- Catalog Home
- Exterior Accessories
- Bumper
- Bumper- Rear
Bumper- Rear
- Aluminum Rear Bumper
- Mount Kit Sold Separately
- Popular Diamond Tread Design
- Full Size Tongue Weight of 800 lbs. And 8000 lbs. Trailer Weight
- Downsize and Compact Are 350/3500 lb. Weights
- V5 Tested Certified To SAE J684
- Protects Vehicle From Damage Against Wildlife And Road Debris
- Provides Added Safety To Driver And Vehicle
- Heavy Duty Diamond Plate Steel
- Honeycomb Mesh Protects Grille/Gives Maximum Airflow
- 1.5 in. Headlight Protection Tubes
- 2 in. Full Wraparound Wings Ties Into Bumper
- Provisions For Factory Parking Sensors
- 2 in. Receiver Hitch/Heavy Duty 9500 lbs. Bow Shackle Mounts
- Compatible For Factory Fog Lamps Or LED Post Mount Lights
- Custom Die Cast Riveted Logo Badge
- Mounting Provisions For License Plate
- Hardware Mounting Brackets Included
- 7 Gauge Steel
- 1-Piece Fully Welded Construction
- 1 in. Thick HS Shackle Mounts
- Two Flush Mount Led Lights Included
- License Plate Illumination Lights Included
- Laser-Cut HDX Logo On Ends
- Application Specific Designs
- Mounting Brackets Included
- Available With Or Without Provision For Back-Up Sensors
- Available In Textured Black Finish Or Raw
- Designed To Absorb Rear Impacts Up To 5Mph
- Ideal For Delivery Vans And Cargo Vans
- Integrated 9-1/2in. Wide Stepping Surface
- Fleet-Approved Expanded Metal Treads For Maximum Traction
- Reinforced Heavy-Wall Steel Tube Construction
- Dual A-Coat w/Gloss Black Powder Coat Finish
- Designed To Accept Parking Sensors
- Assembled In USA
- Designed To Absorb Rear Impacts Up To 5Mph
- Ideal For Delivery Vans And Cargo Vans
- Spring-Loaded Shock-Absorbers Built Into The Mounting Brackets
- Integrated 9-1/2 in. Wide Stepping Surface
- Fleet-Approved Expanded Steel Treads For Maximum Traction
- Reinforced Heavy-Wall Steel Tube Construction
- Universal Design With Vehicle-Specific Shock Assembly
- Made In Usa May Include Imported Hardware
- Mount Kit Included
- 2 In. Diameter Tube Frame
- Optional Class III/IV Hitch Available. Sold Separately
- Retractable License Plate Holder Conceals Receiver Hitch
- Equipped With Mount Points For Optional Auxiliary Lights
- Available For Vehicles With Or Without Backup Sensors
- Bolt-On Installation; No Drilling Required
- Signature Series Step Pad
- Complete Assembly
- Molded Polymer Step Pads
- V5 certified
- Interchangeable Components
- 3 Year Warranty
- Increases Ground Clearance And Angle Of Approach
- Constructed Of 10 Gauge Steel For Strength And Style
- Compatible For Blind Spot Monitors And Parking Sensors
- Accommodate For Oem Hitch And Led Back Up Lights
- Configured To Accept 2 Fm6 Led Flush Mount
- Custom Laser-Cut Westin Logo
- Hardware And Mounting Brackets Included
- Bolt-On Installation - No Drilling Required
- Mounting Brackets Will Vary With Make/Model
- Brushed Aluminum Skid Plate Included- Works with Factory Hitch
- Fully Welded 1-piece construction- 1.75 in. .095 Wall Tubing
- Pre-Runner Style
- 5 year Finish Warranty- Lifetime Workmanship Warranty
- 7 Gauge Steel
- 1-Piece Fully Welded Construction
- 1 in. Thick HD Shackle Mounts
- Two Flush Mount Led Lights Included
- Welded Hitch Receiver
- Laser-Cut Snyper Logo On Ends
- Mounting Brackets Mount Directly To Frame
- Textured Black Finish
- Cold Rolled Brite Steel
- OE Style Steel Step Plate
- Molded Polymer Surface
- Mount Kit Sold Separately
- 3 Year Warranty
- Functional Design
- Works With 2 in. Receiver Tow Hitch
- Contoured Corners
- Allows Clearance For Spare Tire
- Black Powdercoat Finish
- 3 Year Warranty
- Cutouts and Mounting Tabs for OE Lights and Aftermarket LEDs
- Strong/ Lightweight And Rust-Free Hardened Aluminum Construction
- Textured Black Powder Coat Easily Hides Minor Scratches And Grime
- Center Cutout For Trailer Hitch Receiver Tube
- Pre-Existing Factory Mounting Points For No-Drill Bumper Install
- Front And Rear Bumpers Available
- Includes Center Section PN 2081001/ Corners PN 2081200
- Includes Brush Guard PN 2081205 And Mounting Hardware
- Cutouts and Mounting Tabs for OE Lights and Aftermarket LEDs
- 3/16 in. Carbon Steel Construction For Maximum Strength
- Textured Black Powder Coat Easily Hides Minor Scratches And Grime
- Center Cutout For Trailer Hitch Receiver Tube
- Pre-Existing Factory Mounting Points For No-Drill Bumper Install
- Front And Rear Bumpers Available
- Includes Rear Center Section Only
- LEDs Feature Waterproof Aluminum Housing And 50000-Hour Lifespan
- Flood Beam Pattern w/2200-Lumen Output Each
- Cutouts And Mounting Tabs Allow For OE Lights
- 3/16 in. Carbon Steel Construction For Maximum Strength
- Textured Black Powder Coat Easily Hides Minor Scratches And Grime
- Center Cutout For Trailer Hitch Receiver Tube
- Pre-Existing Factory Mounting Points For No-Drill Bumper Install
- Front And Rear Bumpers Available
- Includes Rear Center Section PN 2081020
- Includes Corners PN 2081222 And Mounting Hardware
- Shackle Rating Of 12500 lbs. For Off-Road Purpose
- 1/4 in. Thick Sleeves Provide Reliable Anchoring Points
- Shackle Mounts Accept Pins Up To 7/8 in. In Diameter
- No-Drill Install Use Factory Mounting Points w/No Pump Relocation
- One-Piece Construction w/3/16 in. Thick/ All-Steel Plates
- Narrow Width And High Ground Clearance For Off-Road-Style Design
- Durable Carbide Black Powder Coat w/Rust-Resistant E-Coat Finish
- Center Cutout For Rear Mount Trailer Hitch Receiver Tube
- Includes Mounting Hardware And 3/8 in. Thick Brackets
- Includes Bull Bar And Mounting Hardware
- Bull Bar May Interfere w/Forward-Facing Cameras Or Sensors
- RotoPax Mount
- 3/16-Inch Plate Steel Construction
- Designed To Work With Factory Or Westin Hitches
- Integrated Recovery Shackle Mount Points
- Auxiliary Light Mount Points
- Rock Light Mount Points
- 2 Off-Road Jack Points
- No Drilling Required - Bolt On Installation
- Includes Bumper; Mounting Hardware And Install Instructions